Behr Hella EVIDIS Instrucciones Para El Manejo página 11

Position the unit in the footwell of the
vehicle in such a way that the mist
discharged from the unit can be drawn
in by the footwell air nozzle with the
A/C system switched to recirculating
operation. Use the bubble level to
align the unit so that it is horizontal.
Disinfection process
• Start the engine (make sure that
the vehicle is in neutral, and that
the exhaust gases are being
extracted off if the application takes
place in closed rooms).
11
• Set the interior temperature to
22 °C / 72 °F and switch the A/C
system on.
• Set the interior fan to half speed.
• Switch the A/C system on.
• Select recirculating operation.
• Select blowing only via the
nozzles in the dashboard.
• Use the cable (1) to connect
the unit to the voltage supply
(12V vehicle electric system socket).
• All the indicator lamps light up
and go out again within 2 seconds.
• The power supply indicator (7)
lights up.
• Press the RED start button (6).
• The treatment indicator (8) lights up.
• The unit now begins to atomise
the liquid.
• Close the vehicle windows and
doors.
• Treatment takes about 14 minutes
at 22 °C / 72 °F.
• The unit switches off automatically
and the indicator "treatment
completed" (9) lights up.
• Stop the vehicle engine.
• Disconnect the 12V power supply
by pulling and removing the plug.
Do not pull the cable!
• Leave all the doors open for at
least 5 minutes to ventilate the
interior.