ZIGBEE E1 Manual De Instrucciones página 9

2 Set the fully open position
A er deleting the rotating range, adjust the actual position of
the shade to fully open by pressing the Up or Down button, and
then press the Up button 5 times in succession. If the indicator
light turns blue and flashes 3 times, it indicates that the setting
is successful.
3 Set the fully closed position
A er setting the fully open position , adjust the actual position
of the curtain to fully closed by pressing the Up or Down button,
and then press the Down button 5 times in succession. If the
indicator light turns blue and flashes 3 times, it indicates that
the setting is successful.
A er setting the fully open and fully closed positions, the
rotating range setting is complete.
4 Remap the buttons to rotate the motor in the opposite direction
If you press the button of which the direction is opposite to the
actual rolling direction of the roller shade, the rotating direction
of the motor can be reversed by pressing the RESET button
three times; and then, if the indicator turns to blue and lasts for
1 second, it indicates that the rolling direction of the motor is
reversed.
Device control (a er rotating range is set)
Purpose
Roll the roller
shade
Unroll the
roller shade
Stop the roller
shade
Delete rotating
range
Reverse motor
rotating direction
Check network
status
Click Up Button - the motor keeps moving
upwards till the shade is fully opened
Click Down Button - the motor keeps moving
downwards till the shade is fully closed
Roller shade stopped
Press and hold the Up button and the Down
button at the same time for three seconds
Press the RESET button 3 times in a row,
(a er the operation, the blue indicator will
be on for 1 second and then o )
Click the RESET button, if the indicator is
blue, it indicates that it is connected to the
network
Click the RESET button, if the indicator is red,
it indicates that it is not connected to the
network
6
Operation