ATTACHMENT STORAGE
Pet PowerMate
ThTscanTster is equipped with an on-board
storage area for a Pet PowerMate
attachment.
ToStore:
1. Open the Pet PowerMate storagecover.
2. Insert the Pet PowerMate
and press down
until ff clicks into place.
3. Close the lid securely.
/Sf°rage
Pet
J
Cover
PowerMate
I"
To Remove:
1. Open the storage cover.
2. Remove Pet PowerMate
from the storage
area.
3. Use as needed. See ATTACHMENTS
(page 14-16) and ATTACHMENT USE TABLE
(page 17).
Floor Brush & Pet Tool
This canister is equipped with an on-board
storage area for attachments:
To Store:
1. Open the tool storage cover.
2. Insert the tool and press down until it
clicks into place.
3. Close the lid securely.
Storage
Cover
To Remove:
1. Open the storage cover.
2. Remove attachment from the storage
area.
3. Use as needed. See ATTACHMENTS
(page 14-16) and ATTACHMENT USE TABLE
(page 17).