Technical Data - Urrea TLP200 Manual De Usuario

washers.
4. While keeping the cabinet upright, re-
move eight M6 x 12 bolts, lock
nuts, and washers to connect the metal
shelf to the legs.
5. After assembly is completed, level cabinet
and fully tighten all bolts.
OPERATION
1. Fill unit with water-based solvent just
below the level of the parts shelf before
plugging into the electrical outlet.
2. Carefully follow degreaser manufactur-
er's instructions.
3. Open top lid and place parts on remov-
able tray (maximum load capacity is 66 lb).
4. Position the adjustable nozzle over the
parts.
5. Turn the power switch to the ON position.
6. Clean parts as needed.
7. When finished, turn switch to OFF posi-
tion.
8. Clean up work station.
9. Fusible link must be replaced if triggered.
10. Unplug compressor and drain unit when
not in use.
E N G L I S H •
MAINTENANCE
Powder Coat Finish
For heavy build-up of dirt and grime, our
powder coat paint finish can be cleaned
with multipurpose cleaner. Lightly spray on
the surface, and gently wipe with a soft, dry
cloth.
CUSTOMER SATISFACTION
All mechanical parts are inspected and
adjusted for proper use before shipment;
however, there may be some shifting of
parts during transit.
Should any item not op-
erate correctly, please call customer service at:
01800 8887732.

TECHNICAL DATA

PUMP
DIMENSIONS
FLEXIBLE METAL HOSE
U s er 's m anual
120 V ~ 60 Hz - 1/2 gpm flow
17 3/8" x 14 1/4" x 8 3/4"
13 3/4" flexible nozzle
5