Logic3 PS909 Manual De Instrucciones página 2

EN
Thank you for purchasing the Logic3 Stealth GamePad with Vibration for PS3. As with all Logic3 products it has
been built to the highest manufacturing standards and tested throughout its development, to ensure you get the
best possible product. Please read through and familiarise yourself with this manual before you use the Stealth
GamePad with Vibration for PS3.
Features and Specifications
1. The PS909 GamePad features a 6 axis motion sensing feature, including 3 axis translation motion
(X,Y,Z) and 3 axis rotational motion(pitch, roll and yaw) and a built –in rechargeable Li-on battery.
2. HOME button for setting on PS3 console;
3. Sleep mode for Low power consumption.
Connection
1. Turn on the PS3 console/ Freebird Stealth Wireless Gamepad (LED - Player indicator lights will flash
slowly)
2. Press 'SELECT' + L3 buttons simultaneously on the Freebird Stealth Wireless Gamepad (LED - Player
indicator lights will begin to flash quickly).
3. Connect the receiver to a USB port on your PS3 console.
4. Press the 'Home' button on your Freebird Stealth Wireless Gamepad (LED - Player indicator will light up
to the corresponding Player number)
5. The LED number indication on the GamePad will represent the player number the GamePad is
assigned to :
LED 1 ~ 4 = Player 1 ~ 4
LED 1 + 4 = Player 5
LED 2 + 4 = Player 6
LED 3 + 4 = Player 7
Note 1 – Player indicator this will not light up if the Freebird Stealth Wireless Gamepad is connected to a PC.
Note 2 - Once the Freebird Stealth Wireless Gamepad has been paired with the Dongle, you will only need to
press the 'Home' button to connect
Note 3 - Once the receiver or GamePad is disconnected from the USB port of the PS3 or the PS3 console is
restarted or switched off you will need to re-connect the GamePad.
Re-connecting a GamePad
1. If you have already created a connection between the GamePad and your PS3 and are trying to re-connect a
GamePad, connect the receiver or GamePad to a USB port on your PS3 console and press the HOME button to
automatically connect the GamePad.
Power save (Sleep Mode)
To save on battery power the PS909 GamePad feature a power save mode. There are 2 ways to enter the
power save mode.
1. No connection is made between the GamePad and receiver after 50 seconds;
2. The GamePad is left idle for 10 minutes;
To exit the power save mode press the HOME button, the LED indicator on the receiver will now glow/flash.