Cooper Metalux WSL Instrucciones De Instalación

IB519025EN
Installation Instructions – WSL Long Connector
Instructions d'installation – Connecteur long WSL
Instrucciones de instalación – Del conector largo WSL
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards
involved. Cooper Lighting Solutions assumes no
responsibility for claims brought about by improper or
careless installation or handling of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
1. Bend end piece to allow wiring into the fixture.
(Figure 1.)
2. Insert Channel Joiner to one of the channels.
(Figure 2.)
Flange
Endplate
Figure 1.
Flange
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Minimum 90° supply conductors.
N ote: Specifications and dimensions subject to change
without notice.
Figure 2.
Brand Logo
reversed out of
black
INS # INS #
Long Connector