HOW TO STEAM UPHOLSTERY
The clothes steamer can be used to help freshen up upholstery, slip covers on furniture and
cushions from the furniture and in the room. Before steaming, always test on a small area of
the fabric that is not visible.
Keeping the clothes steamer in an upright position and using an up and down motion, lightly
steam over the fabric of your furniture. Cushions should be removed and held upright for
steaming. Allow cushions to dry thoroughly before replacing on furniture.
TIP:
It is recommended that you use the delicate fabric accessory when steaming delicate fabrics
such as silk, this will minimize any damage to the garment whilst steaming. For better results
when removing stubborn creases, remove the delicate fabric accessory attachment from the
steam head and continuously steam over the selected area until creases are removed.
NOTE:
Only use the attachments or accessories provided.
If the unit becomes noisy with a loud humming sound and no steam is being
generated, check the water level in the water tank. This may be an indication that the
clothes steamer is out of water and needs to be refilled.
WARNING: If garment has metal accessories, be cautious and do not position the clothes
steamer directly over the metal as this may discolour the metal.
WARNING: Always unplug the clothes steamer, and allow to cool down,
before attaching or detaching the delicate fabric accessory.
WARNING: Do not use the clothes steamer directly on persons, animals,
or while wearing the garments.
HOW TO INSTALL THE ACCESSORIES
The accessories clip on the steam head, on its top and under it.
Start by inscerting the bottom part then push the top part into place.
8