Artecristal MOANA Manual De Instrucciones página 5

After wrapping the tape, connect the water
connector to the wall. (The distance between the
hot water outlet and the cold water outlet connector
is 150mm, the height apart from the floor should be
set according to the height of the bathtub)
Fix the shower handle bracket in a suitable position
according to the user' s height and favorite. Next,
mount the shower hose on the mixer and the hand
shower.
INSTALLATION
Screw the trim to the connector. Install the shower
body with the connector using two connecting nuts
and fix them with a wrench.
(Note: It is suggested to wrap some tapes on the
key to avoid scratching the surface of the product)
The above installation instruction is also applicable
to the shower faucet`s installation.
Installation Installation
EN EN