Rev-A-Shelf LD-4CT Serie LD-4CT15 Instrucciones De Instalación

LD-4CT15/21
TOOLS REQUIRED:
ESTIMATED ASSEMBLY TIME:
10 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
STEP 1
Place base unit into the drawer
and secure with (2) #5 x 3/8" flat
head screws into the pre-drilled
holes found on the bottom panel
(See Fig. 1).
STEP 2
Install the clips by pressing
them firmly into the pre-drilled
holes of the cross rails and side
rails. Customize to desired
configuration (See Fig. 2).
STEP 3
Slide the dividers onto the clips
and press firmly into place
(See Fig. 3).
Parts List
No. Description
1 Base Unit
2 Clips
3 Small Dividers
4 Medium Dividers
5 Large Dividers
6 Split Dividers
7 #5 x 3/8" Flat Head Screws
1
(LD-4CT 15" unit)
FIG.1
FIG.3
Qty 15"or Qty 21"
1 1
18 26
3 4
4 2
0 4
2 3
2 2
1
(LD-4CT 21" unit)
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
800-626-1126
2
3
4
5
6
7
FIG.2
I-LD-4CT-0617