Assembling Your Steam Cleaner; Instructions For Use - EFFEKTIV TURBOVAPOR 1050X Manual De Usuario

USER MANUAL

ASSEMBLING YOUR STEAM CLEANER

• Take the appliance and its accessories out of the box. Remove packag-
ing foam from all parts of the appliance.
• For first-time use, let it run idle for a few minutes. This will help remove
dirt and odors that may have been leftover from the manufacture of the
appliance. We recommend that you first test the appliance on a piece of
fabric before steaming your clothes.
• Open the water tank lid and fill with water until the "MAX" level is reached.
Do not exceed the "MAX" level on the appliance! Make sure the water tank
is at least a third full!
• Close the water tank lid.

INSTRUCTIONS FOR USE

STEAMING FABRIC/CLOTHES:
• Plug in the appliance and press the switch button on.
• Select the required operating temperature.
• The heating indicator should turn on. As soon as the heating indicator
turns off, the appliance is ready to begin steaming. The heating indicator
may cycle off and on during use – this is a normal part of the operation,
as the heater works to maintain a steady optimal temperature of the
ceramic soleplate.
• Press the steam button and get started.
TURBOVAPOR 1050X
5