METRICA 60804 Manual De Empleo página 4

Láser autonivelante
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

SELF-LEVELING LASER
INSTRUCTIONS
Insert 3 alkaline AA-batteries (1.5 V)
• To turn on the device, move the switch "S" to ON. The pendu-
lum system may oscillate freely.
• If the device is out of range, the LED "A" will be on reposition
the device inside the self-levelling range, the LED "A" will turn
off.
• When you switch on the device, it is set for interior use, with
increased visibility without receiver.
• To use the OUTDOOR function with receiver (supplied separa-
tely), press the I/O-BUTTON: the LED "B" lights up.
• To project, press the button
• 1 time = horizontal line
• 2 times = vertical line
• 3 times = cross
+
self-leveling
• 4 times = fixed cross, NOT self-leveling, orientable
function). The red LED "A" is on.
• 5 times = the lasers turn off, the unit is still on
CAUTION
• The device will indicate when it is out of range of self-levelling:
the red LED "A"
will be on and the laser will turn off
• To turn off the unit, move the switch "S" to OFF
4
subsequently:
––
self-leveling
|
self-leveling
X
(manual
A
B
ON
OFF
S

Publicidad

Tabla de contenido
loading

Tabla de contenido