MS-3 Instructions
• Power On/Off—Press and hold power button ( ) for 1 second to switch
headphones ON or OFF. Headphones will automatically switch off after 60
minutes of inactivity.
• Volume—Use one-handed control on MS-3 to adjust the signal level.
Metal detectors with built-in volume controls should be adjusted to
maximum signal levels.
• Pairing—MS-3 Wireless Headphones are designed to pair with any Z-Lynk
transmitter. Follow the pairing instructions provided with the transmitter.
• Recharging—Plug the supplied charging cable into the MS-3 headphones
and any standard USB port to recharge. Headphones will completely
recharge in five hours.
539900.A.MS3_Wireless_manual-EN-ES-FR.indd 3
3
7/7/2017 12:59:37 PM