Safety Instructions - Elnur IC1200 Manual De Uso

Safety Instructions

- This appliance is manufactured in accordance with the safety
regulations. Operation against the rules cause harm both to the
person and the appliance.
- Please read the User Manual carefully before starting to use
your appliance. You will find important information on installation,
safety, operation and maintenance in the User Manual. Thus, you
may protect yourself and
prevent damage to the appliance.
- If the power supply cord is damaged, it shall be replaced by
its manufacturer or authorized technical service or any other
personnel qualified at the same level, in order to avoid any
dangerous condition. Inspect the carbon filament on the appliance
for cracks and deformation. Do not use the heater if the carbon
filament is damaged, contact an authorized service.
- Check if the main power line provides 220 - 240V A C, 50/60Hz
and if the power line is connected to a fuse. Network safety must
be checked. Fuse rating shall be 16 Amperes. Your appliance
should be used with a grounded socket and the grounded socket
should be away from the heating area and the hot surface. Also,
it must be checked that the socket is not loose or damaged.
Because loose sockets damage the appliance.
- Do not connect your appliance to the same power cord or the
same fuse together with another appliance. Some parts of this
appliance may get very hot and cause burns. Special care must
be exercised where children and vulnerable people are present.
- Do not leave the supply cord in the vicinity or on the hot body of
the appliance.
- Unplug your appliance if your appliance shall not be used for a
long period of time, shall be moved or cleaned or if an adjustment
17