Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
Stick the double-sided tape on a power strip and fix it on the middle bar as shown in the image.
6
Put the power cord of the power strip into the hole in the stand base.
NOTE
•
Cut the double-sided tape to fit the size of the power strip.
•
The shape of the power strip may differ by region.
•
Make sure the power cord of the power strip points toward the floor.
•
Make sure no parts of the power strip protrude from the middle bar.
If the power strip protrudes from the bar, it may bump against the monitor.
7
Publicidad
Tabla de contenido
