Especificaciones - Witech WT GP1 Guía De Usuario

3.1 Especificaciones.

Hazardous Areas
Dimensions
Housing Materials
Interface Connector
3G/GPRS Antenna
Radio Frequency
GSM/GPRS/WCDMA
Sensitivity
Transmit Power
LEDs
Mode
Coding Schemes
Packet Channel
Application Interface
Host Protocol
Sim Access
Operating Temperature
Humidity
Connector
Antenna
GPS Protocols
DC Voltage
Sleep Mode
Tx Mode
RX Mode
1 Analog Output
Specifications Smart Módem® WT-GP1 V2.1
Complies Class 1, Div 2 Pending certification. Option: Class 1, Div. 1
165mm x 791mm x 35mm.
Seamless Aluminum extrusion, Powder coated.
Principal 36 pins connector.
Female SMA Connector, 50 Ohm.
GSM/GPRS/EDGE 850/900/1800/1900MHz
-108 dB.
33 dBm +- 2 dB.
Power, RSSI, Voltage, Data, Link Status.
3G PACKET DATA
HSDPA/WCDMA and Quad-Band GSM/GPRS/EDGE.
CS1-CS4.
PBCCH Support.
RS232, RS485, USB and Ethernet
TCP/IP(3G), AT, USB(CDC)
External -3V, Dual Sim
ENVIRONMENT
0°C to +60°C.
Up to 80% non-condensing.
GPS
SMA Female.
3.3 Active.
NMEA-0183, SIRF Binary
OVER THE AIR CONTROL
I/O Control – Monitors signal strength RSSI level, case temperature,
3 opto – isolated digital inputs, RTD input, 6 analog inputs, 4 opto –
isolated digital outputs.
POWER
6 – 36V.
24uA. (ULP mode)
500 mA (Maximum)
150 mA
CONTROL AND ANALOG INPUTS/OUTPUTS
Min
0
0
Max
28
50
Witech USA Inc. - Smart Módem
Units
V
mA
WT-GP1v2| 8