Publicidad
Idiomas disponibles
Idiomas disponibles
Starting
Insert a micro SD or micro SDHC memory; consult the previous scheme to locate the
components of your camera.
SDHC Class 6 above is recommended. When the professional mode is
enabled for video recording, Class 10 is recommended for use.
Turn the camera off before removing or inserting any memory.
Please close the camera when you insert or eject the memory.
Turn on and turn off.
Turn on:
Press the button for on / off and hold for about 2 seconds. Upon hearing a sound,
turn the camera on, the indicator will be in red
When the camera is not in operation for about a minute, the energy saving mode
is activated. The LCD screen turns off automatically. The camera can be activated
when any button is pressed.
To turn off:
When the camera is not in operation, press the button for about 3 seconds. Again,
the alarm will sound and the camera turns off.
Charging the camera
The camera has a battery:
The camera can be charged when connected to the USB port of your computer
via a USB cable. A red light will come on and at the end, will turn off.
4 hours is the estimate for the battery recharge time.
The camera can be used while charging.
Video and Photography
The TLF-AC360 camera has two modes, ie, video recording and photo shooting. To
switch between picture and sound, press the Menu button.
Record a video:
Press the shutter to start recording video. When you are recording the
camera, it will emit light intermittently to indicate that it is in operation. To
stop recording, press the button fly and automatically stop flashing.
Publicidad
