Telefunken TLF-ACFHD Manual De Instrucciones página 24

Installation
1 To release cover, pull the latch.
2 According to the label of the battery (the + or -), place the battery in
position to match both the bottom of the battery with the same inner sense
of groove with their respective + y-.
3 Place the lid in place again.
Charge
1 Connect USB to the camera and a computer or some kind of adapter to
start charging the battery cable.
* The camera can be loaded in the car while you are recording, you only
need to re-enter the camera menu and select: auto mode)
Remove
1 To release cover, pull the latch.
2 Pull carefully the tab that has attached the battery to remove it.
3 Place the lid in place again.