Aa Bolt; 1/4 X 1-1/4 In; Bb Flat Washer; Cc Wood Dowel - Twin Star KC4339-P239-40 Instrucción De Montaje

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
ASSEMBLY INSTRUCTIONS
1. Put the top (G) upside down and locate the
Left/Right side panels (E,F), Insert wood dowels
(CC) in the holes of two side panels, using Bolts
(AA ) and washer (BB) attach them to the top.
Tighten the support post (O1) as the illustration
shown.
Hardware Used
Bolt
AA

1/4 x 1-1/4 in

BB
Flat Washer
CC Wood Dowel
2. Put the Semi-circle panel (D) on the Support Post
(O) and Insert Wood Dowels (CC) through the
pre-drilled holes, using Bolts (AA) and Washers
(BB) through the pre-drilled holes in the mounting
blocks attach it to the side panel.
Hardware Used
Bolt
AA
1/4 x 1-1/4 in
BB
Flat Washer
CC Wood Dowel
Fig. 1
O1
x 4
x 4
x 4
Fig. 2
D
x 2
x 2
AA BB
x 2
4
AA
BB
F
G
CC
E
CC