Lorex SG610 Manual De Instrucciones

Imitation Camera with Stand
The Lorex Imitation Surveillance Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with
imitation lens and imitation infrared LEDs. Mount the Imitation Surveillance Camera in a visible area on a ceiling or wall to deter possible thieves
and intruders.
INSTALLING THE IMITATION SURVEILLANCE CAMERA
1. Installing the Camera:
• The Camera and short cable are firmly attached to the base.
• Drill 1 inch holes in the marked positions for the 3 screw holes.
• If necessary, insert the supplied drywall anchors into the screw holes.
• Insert a 1 inch screw (provided) through each of the three (3) screw
holes in the mounting base plate and into the mounting surface, then
tighten the screws.
2. Position the camera by loosening the thumbscrew, moving the camera to the
desired angle, and securing the thumbscrew to hold the camera position.
CAMERA CARE:
Handle the Imitation Surveillance Camera carefully; do not drop it. Wipe the
camera with a damp cloth occasionally to keep it looking new
SPECIFICATIONS
Weight
Dimensions:
(W x H x D )
MODEL SG610
Imitation Indoor / Outdoor Surveillance Camera
English Version 1.0
Screw & Anchor Pack
0.45 lbs / 0.21 kg
2.1" x 3.6"x " x 4"
53mm x 90mm x 100mm
THIS PACKAGE CONTAINS:
1 x Imitation Camera
1 x Screw and Anchor Pack
FEATURES
• Realistic Imitation CCTV Surveillance Bullet Camera
• Uses Genuine Metal Camera Body
• Ideal For Indoor/Outdoor Use
1.
Camera
2.
Ceiling / Wall