Cisco Systems LINKSYS ADSL2MUE Guia De Inicio Rapido página 3

Connect the other end of the
cable to the Ethernet port on
the back of the Modem. (C2)
D
Connect the power adapter to
the Modem and to the
electrical outlet. Turn on the
Modem.
E
Turn on your PC.
NOTE: A small device called a microfilter
(not included) may be necessary between
each phone and wall jack to prevent
interference. Contact your ISP if you have
any questions.
IMPORTANT: Based upon the
requirements in your country, you should
make sure to only place the microfilters
between the phone and the wall jack and
not between the Modem and the wall jack.
The installation of the Modem with
an Ethernet Connection is
complete. If you need to configure
your Modem, refer to Section 3.
C2
D
3