Strong Racks SRSWS36R Manual Del Usuario página 20

1.) When installing grids there must be adequate clearance for the
grids to be inserted into the brackets. For the grids to be properly seated
in the bracket, a minimum of 14 inches of clearance above the bracket is
required.
2.) If there is not enough clearance above the shelf there must be
enough space to slide the grid in (from left or right) through the brackets.
3.) If there is inadequate clearance both from the bracket to an
obstruction above and side to side, you will need to: remove the
brackets, attach them to the grid, hold the assembled unit, align the
brackets with the drilled holes and secure each bracket.
14"
1.)
Appendix III – Grid
2.)
Installation
Attach brackets to
3.) Last resort, secure full
assembly
grid
20