West Bend QUIKSERVE Glass Carafe Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
P
K
W
H
ROGRAMMING THE
EEP
ARM
OURS SETTING FUNCTION
(G
)
LASS CARAFE VERSION ONLY
Use PROG/AUTO button to select the Keep Warm Hours setting function. The
PROG/AUTO indicator light and the last set (programmed) 1-digit Keep Warm Hour
LCD will be flashing. Note: The default value will be the last programmed Keep
Warm Hours setting. If the displayed value is desired, press PROG/AUTO to
confirm and set or pressing the HOUR button will adjust the keep warm hour setting
from 1 to 5 hours. Each pressing of the HOUR button will increase the keep warm
time by one hour. After the 5 hours maximum setting, the keep warm time will cycle
back to 1hour.
Pressing the PROG/AUTO button will confirm and set the keep warm hour setting
displayed. The PROG/AUTO indicator light and the CLOCK display will be flashing.
Note: The default value displayed will be the last time of day displayed.
P
24
C
ROGRAMMING THE
HR
LOCK SETTING FUNCTION
Use PROG/AUTO button to select the 24hr Clock setting function. The
PROG/AUTO indicator light and the CLOCK display will be flashing. Note: The
default value in the display will be the last time of day displayed. If the displayed
time including AM or PM is desired, press PROG/AUTO to confirm and set or each
pressing of the HOUR or MINUTE button will adjust the time setting (and alternate
between the display of AM or PM at each passing of 12:00). Note: Ensure the
desired AM or PM LCD is displayed. If the alternate is displayed, continue to press
the HOUR button until the desired hour and AM or PM LCD icon is displayed.
Pressing the PROG/AUTO button will confirm and set the displayed clock setting.
The time of day including AM or PM will be displayed with the colon (:), between
hours and minutes, flashing to indicate the control is no longer in programming
function; the PROG/AUTO indicator light will go out as well as all other indicator
lights except the CLOCK.
M
B
ANUAL
REW
Pressing ON/OFF button immediately starts the brew cycle. The ON/OFF indicator
will illuminate and the Brew LCD icon will be on to indicate the brewing cycle. Note:
If Auto-Brew was set, manual brewing by selection of the ON/OFF button
automatically cancels the Auto-Brew and the Auto LCD icon goes off. Note: The
brew cycle will not initiate if the carafe is not in place (see Brew Stop Feature).
When the brew cycle is complete and the coffeemaker begins the keep warm
function (if applicable), the Brew LCD icon will be off indicating the brew cycle is
complete and the ON/OFF indicator light will remain on. The coffeemaker will
continue the keep warm cycle until the programmed keep warm time has elapsed.
When the programmed keep warm time has elapsed the coffeemaker will turn off.
Pressing the ON/OFF button when the coffeemaker is already on immediately
cancels the brewing or keep warm cycle and turns the coffeemaker off.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Quikserve thermal carafe

Tabla de contenido