Uniteck UNIMOS 80/24.2 Manual De Instrucciones página 11

Dear customer, thank you for purchasing one of our Uniteck products. Please read all the instructions
carefully and thoroughly before using the product.
DESCRIPTION
UNIMOS is a ultra-compact battery isolator made to be used with 12V or 24V batteries.
It is ideal to charge various batteries from one charging source (ex: alternator, solar charge controller,
automatic battery charger).
Installed between the charging source positive terminal and the batteries positive terminals, UNIMOS
isolates the batteries in order to charge all of them at the same time preventing them from charging or
discharging each other.
UNIMOS can be used with 12V or 24V batteries: the battery voltage is automatically detected.
The maximum input intensity and the outputs number can vary according to the models:
- 80A / 2 outputs for UNIMOS 80.24/2
- 120A / 2 outputs for UNIMOS 120.24/2
- 160A / 3 outputs for UNIMOS 160.24/3
- 200A / 3 outputs for UNIMOS 200.24/3
NB : for a charge from a solar charge regulator or an automatic battery charger, a battery
voltage reference cable is needed.
Thanks to its last generation MOSFET components, UNIMOS provides unique performances compared to
other battery isolators available on the market, with very low voltage drops for more power.
Example : comparison between Unimos 200.24/3 and other battery isolators on the market (12V battery) :
Current / Power
20A – 240W
50A – 600W
100A – 1200W
200A – 2400W
Losses
UNIMOS MOS isolators
<0,1 W
< 0,5 W
< 5 W
<15 W
www.uniteck.fr
Other losses
<1 W
< 6 W
< 25 W
< 100 W
EN
Losses
Diode isolators
< 8 W
< 20 W
< 70 W
< 140 W
11/28