Behringer CRAVE Manual Del Usuario página 70

70
CRAVE
Specifications
Synthesizer Architecture
Number of voices
Type
Oscillators
LFO
VCF
Envelopes
Connectivity
Power input
Power switch
MIDI In, Out/THRU
MIDI channel switch
USB (MIDI)
Outputs
Outputs impedance
Headphones
Headphones output impedance
USB
Type
Supported Operating Systems
Oscillator (VCO) Section
Type
Controls
Switches
Filter (VCF) Section
Controls
Switches
Output (VCA) Section
Controls
Switches
Envelope Section
Controls
Switches
Monophonic
Analog
1 (8.176 to 8.372k Hz)
1 (0.1 to 350 Hz)
1 low pass, high pass (24 dB/octave slope)
ADS, selectable for VCO, VCF, VCA
DC input connector
Push button on/off
MIDI In and MIDI OUT/THRU, 5-pin DIN
Channel selection/ 16 channels
USB 2.0, type B
VCA/line output: 3.5mm TS, unbalanced, max. +8 dBu
1 kΩ
3.5 mm TRS, max.10 mW@32 Ω
16 Ω
Class compliant USB 2.0, type B
Windows 7 or higher
Mac OS X 10.6.8 or higher
3340
Frequency: -5 to +5
Pulse width: 5 to 95%
Oscillator modulation: 0 to 10
Mix: -5 to +5
Shape: pulse, reverse saw
Modulation source: env/osc mod, LFO
Modulation destination: width, frequency
Cutoff frequency: 0 to 10 (20 Hz to 20 kHz)
Resonance: 0 to 10
VCF modulation: 0 to 10
Filter mode: low pass, high pass
Modulation source: env, LFO
Modulation polarity: positive, negative
Volume: 0 to 10
VCA mode: envelope, on
Attack time: 0 to 10 (2 ms to 3 s)
Decay time: 0 to 10 (2 ms to 5 s)
Sustain level: 0 to 10 (0 to 8 V)
Sustain: on, off