Tripp-Lite T015-POE El Manual Del Propietario página 10

PoE Test Function
PoE Power Test
In the PoE power test, a PoE power supply device and a PoE
powered device (such as a PoE switch and a PoE camera) need
to be connected to emitter's PoE port.
After the correct connection is made, a fluctuating voltage value
will display at the screen. A few seconds later, it will automatically
enter the power testing interface. The display information appears
like the following image.
Pins Providing Power
When the screen displays PoE Power, press the "OK" key to
identify the type of PSE. If the "Non-Standard" message appears,
the PoE power supply device does not comply with the PoE
standard. If no new message appears, it indicates the PoE power
supply device complies with the PoE standard. (PoE power is the
power currently consumed by the PoE powered device). Use the
PoE switch test function to test the switch separately.
19-10-184-933B7C.indb 10
PSE Type
Polarity
10
Modes
Voltage
12/10/2019 2:01:03 PM