Registering Magic Remote; Open Source Software Notice Information; External Control Device Setup - LG SIGNATURE OLED65G7V Seguridad Y Referencias

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 56
Streaming Service buttons Connects to the Video Streaming
1 2
Service.
(INPUT) Changes the input source.
- Pressing and holding the
button displays all the lists of external
inputs.
(Q. Settings) Accesses the Quick Settings.
1
- Pressing and holding the
button displays the All Settings menu.
Teletext buttons (
,
* Provides content related to the programme you are
currently watching.
Views the information of the current programme and screen.
Control buttons (
) Controls media contents.
By zooming in on the selected area, you can view it in full
screen.
* You can zoom in on the area where the remote control is
pointed.
,
,
,
These access special functions in some menus.
* To use the button, press and hold for more than 3 seconds.

Registering magic remote

How to register the magic remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the
on the remote control.
* If the TV fails to register the Magic Remote, try again after turning the
TV off and back on.
How to deregister the magic remote
(HOME) buttons at the same time, for five
Press the
and
seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the
register Magic Remote at once.
14
) These buttons are used for teletext.
Wheel (OK)
button will let you cancel and re-
Licenses
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
External control device
setup
To obtain the external control device setup information, please visit
www.lg.com.

Publicidad

Tabla de contenido
loading

Tabla de contenido