Package Contents; Hardware Installation - Grandstream GWN7000 Guía De Instalación Rápida

EN
OVERVIEW
The GWN7000 is a powerful enterprise-grade multi-WAN Gigabit VPN router. Ideal for the
enterprise, small-to-medium business, retail, education, hospitality and medical markets,
the GWN7000 supports comprehensive WiFi and VPN solutions that can be shared
across one or many different physical locations. It features high-performance routing and
switching power and a hardware-accelerated VPN client/server for secure inter-office
connectivity. To maximize network reliability, the GWN7000 supports traffic load balancing
and failover. The GWN7000 features an embedded controller and automated provisioning
master that can setup and manage up to 300+ in-network GWN series WiFi Access Points.
This can be easily operated through the product's intuitive web browser user interface,
which also offers a central panel to monitor and control the entire network. The GWN7000
also includes an advanced 7-layer network/application monitoring capability based on DPI
(Deep Packet Inspection) technology to securely monitor allnetwork activity.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not use a third party power adapter.
• Do not expose this device to temperatures out the range of 0 °C to 50 °C for operating
and -10°C to 60°C for storage.
• Do not expose this device to environments outside following humidity range: 10-90% RH
(non-condensing).
• Do not power cycle your GWN7000 during system boot up or firmware upgrade.
You may corrupt firmware images and cause the unit to malfunction.

PACKAGE CONTENTS

GWN7000 VPN Router
1
1 x Quick Installation Guide
1 x 12V Power Adapter
1 x GPL Statement
GWN7000 PORTS
Port Description
POWER Power adapter connector (DC12V, 2A)
RESET Factory reset button. Press for 7 seconds to reset factory default
settings.
LAN1/POE Ethernet RJ45 port (10/100/1000Mbps) supporting PoE+.
LAN (2,3,4) Ethernet RJ45 ports (10/100/1000Mbps).
NET Ethernet RJ45 port (10/100/1000Mbps); can be configured as
WAN, LAN or VoIP port.
WAN (1,2) Ethernet RJ45 ports (10/100/1000Mbps), to connect to a modem's
LAN port.
2x USB 3.0 (for printer/file sharing)

HARDWARE INSTALLATION

GWN7000 can be mounted on the wall. Please refer to the following steps for the ap-
propriate installation.
Wall Mount
1. Use a 6 mm drill bit to drill two holes 15 cm
apart.
2. Insert the anchors into the holes. Use a screw-
driver to secure the screws to each anchor. Leave
a clearance of approximately 5 mm between each
screw head and its anchor.
3. Position the GWN router with the Ethernet
ports facing up. Place the wall-mount slots of
the GWN7000 over the screw heads on the
wall. Then slide it down to lock it into place.
Note: GWN7000 can be also mounted in a vertical
orientation.
4. Connect power and Ethernet cables (RJ45) to
the correct ports of your GWN7000.
2