5. LEFT ARM UNIT ASSEMBLY
Carefully turn the Left Arm Frame (D) upside down on a soft surface. Attach Right Base
(F) and Left Base (G) loosely to Left Arm Frame (D) with screws (K) using Allen wrench
(L). Once the bases are aligned correctly, tighten all screws (K) with Allen wrench (L).
Please make sure legs are attached and facing forward as shown in Figure 5 below.
Thinner part of base on the outside.
D
Thinner part of base on the outside.
K
K
G
F
Figure 5
Straight legs should be attached facing the front.
8