Using The Boost Function - GIONIEN GIB464SC Instrucciones Para La Instalación, Uso Y El Mantenimiento

If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
When you have finished cooking
1. Select the cooking zone (A).
2. Press the "-"key will desrease the power to "0" level.
Note: "H" will show which cooking zone is hot to touch. It will disappear when the
surface has cooled down to a safe temperature. It can also be used as an
energy saving function if you want to heat further pans, use the hotplate
that is still hot.

Using the Boost function

Actived the boost function
1. Select the heating zone by touching the zone select key (A).
2. Touching the boost control key(E)
the power reach Max.
Cancel the Boost function
1. Touching the relevant zone select key(A) that you wish to cancel.
2. Touching the slider regulating key(D) to cancel the Boost function, then
the cooking zone will revert to level 9.
• The function can work in any cooking zone.
• The cooking zone returns to level 9 after 5 minutes.
alternately with the heat setting
,the zone indicator show "P." and
13