Maintenance And Cleaning; Declaration Of Conformity - Ama EMC50 Instrucciones Para El Uso

8. MAINTENANCE AND CLEANING

Any repairs should only be made by skilled technical
personnel, using original spare parts
Before examining or cleaning the machine, make sure the
mains power is shut off
Remove the sieve (pict.5-6), remove any remaining cereal,
clean the blades and other parts of the grinding chamber
with a brush or
cloth, remove residues and fit the desired sieve back on
(pict.7-8).
For cleaning, do not use liquids.
IMPORTANT: to ensure the good operation of the
electric mill, the inside parts are best cleaned every
time after use.
If the blades or other parts are found to be worn or damaged,
contact your nearest dealer to have them replaced.
The manufacturer and keeper of technical documentation AMA S.p.A. Via
Puccini, 28 – 42018 San Martino in Rio (RE) Italy
declares under its own responsibility the following product:
Electric mill for cereals Zootechnical use
Mod. EMC50-EMC55-EMC55X-EMC60-EMC70
IS COMPLIANT TO THE FOLLOWING DIRECTIVES:
2006/42/CE, 2014/30/UE, REG. (EC) No. 1935-2004, 2011/65/CE
San Martino in Rio, li 03/01/2019
All the machines manufactured by AMA S.p.A. are subject to ongoing development. We reserve the right to add any
improvements without notice and without update obligations.

DECLARATION OF CONFORMITY

from serial n° 00001 year 2019
STANDARD REFERENCES:
UNI EN ISO 14159
9
9. SCRAPPING
Do not discard this in the environment! Should decide
to stop using the machine once and for all, the various
parts should be disassembled after disconnecting the unit
from the power Each piece should then be placed in its
proper container for pre-sorted
accordance with applicable regulations.
Useful information to end users according
to decree law N° 13 July 2005, "
Implementation
and 2003/108/CE, related
to the reduced consumption of dangerous
elements in electric and electronic equipment, and disposal
of rubbish.
The crossed bin on the equipment indicates you have to collect
the product, once it has come to its, end throw it away in
places suitable for electric and electronic devices, separately
from other waste.
FOR FURTHER DETAILS ABOUT THE ELECTRIC MILL, REFER TO
THE EXPLODED VIEW AND WIRING DIAGRAM.
GB
waste collection in
Legal
of laws 2011/65/CE
THE PRESIDENT
Luciano Malavolti