Selecting A Location - BUCK COMMANDER AGC-408 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SELECTING A LOCATION

e cabinet must be mounted to wall studs and the oor. For
optimal safety and security, the cabinet should be installed adjacent
to the side wall of a closet with minimal space on either side of the
cabinet, in an isolated, dry and secure area.
at against the wall at the back of the unit, as well as at on the oor.
Remove the baseboard if necessary.
THE CABINET SHOULD ALWAYS BE KEPT OUT OF
THE REACH OF CHILDREN.
CENTERS
CABINET
TOP VIEW
MINIMUM
e cabinet should be
16"
SECURING THE CABINET
BEFORE YOU INSTALL THE CABINET TO A WALL AND THE FLOOR,
INSTALL THE INTERIOR COMPONENTS AS DESCRIBED IN THE
ASSEMBLY INSTRUCTIONS.
NOTE:
is cabinet must be mounted to wall studs and the
oor. Failure to do so will compromise the safety and security
of the cabinet.
NOTE:
e cabinet must be secured to wall studs in the top holes
in the back of the cabinet so that it is anchored to the wall studs in
two locations.
e cabinet must also be mounted to the oor. Use
the hardware provided or consult your hardware retailer for
fastening hardware for your particular mounting surfaces
Drill (2) 3/16" pilot holes into the wall studs lining up with the top
(2) mounting holes in the back of the cabinet. Secure the cabinet to
the wall using (2) lag bolts and washers.
Drill (2) pilot holes and secure the cabinet bo om to the oor with
(2) lag bolts and washers.
IMPORTANT
Keep keys in a secure place, away from children. Keep this record of your
serial number in a secure place separate from your cabinet. To order a
replacement key set, follow the instructions on the a ached form.
STACK-ON PRODUCTS COMPANY
P.O. BOX 489
WAUCONDA, IL 60084
5
21
40305-1401

Publicidad

Tabla de contenido
loading

Tabla de contenido