General Info; Installation And Configuration - Perenio PEIFC01 Guia De Inicio Rapido

GENERAL INFO

Specification 1
Functions
Scope of Supply
Warranty

INSTALLATION AND CONFIGURATION

1. Unpack the Indoor Fixed Camera and plug it into the mains using the USB-MicroUSB Cable and the USB
Charger.
2. Connect your smartphone to Wi-Fi (2.4GHz) and log in to your Perenio Smart app Account (or download
the mobile application from Google Play or Apple Store and register a new User Account). Then, click on the
"+" icon in the "Devices" tab and follow connection tips specified on the screen. Complete connection process.
3. Click on the Camera image in the "Devices" tab to manage its functionality.
SAFETY OPERATION RULES
The Device MUST NOT be switched off or disconnected from the mains for at least 5 minutes after the RESET
Button is pressed, as well as for at least 10 minutes after the firmware update process is started. The Device
must not be installed outdoors or exposed to moisture, dust, marine air, etc. Storage and transportation
conditions, as well as working temperature ranges shall be observed. It is not allowed to drop, throw or
disassemble the device, as well as attempt to repair it on one's own.
TROUBLESHOOTING
1. The Camera does not initialize or incidentally reboots: Malfunction of the power adapter or a power supply
failure. Check its functioning.
2. Slow operation of the Camera or video loss: Camera and/or Internet connection failure. Try to reconnect.
3. The Camera does not connect due to Wi-Fi of 5GHz error: Wrong Wi-Fi router settings. Enable Wi-Fi access
point of 2.4GHz frequency.
1 This device is for indoor installation only. Operating conditions: 0°C to +55°C, 20% to 85% RH (non-condensing).
2 All information contained herein is subject to amendments without prior notification of the User. For current information
and details on the device description and specification, connection process, certificates, warranty and quality issues, as well as the
Perenio Smart app functionality, see
perenio.com/documents. All trademarks and names herein are the property of their respective owners. See operating
conditions and date of manufacture on the individual packaging. Manufactured by Perenio IoT spol s r.o. (Na Dlouhem 79,
Ricany - Jazlovice 251 01, Czech Republic). Made in China.
Doc Date: 12/11/2020
©Perenio IoT spol s r.o. All Rights Reserved
Wi-Fi Connection (2.4GHz), Full HD 1080p, 2MP, DC 5V/1.0A (Output), viewing
angle: 90º, mechanical pan/tilt: 350º/90º, white color, slot for MicroSD Card
(Up to 64GB), built-in IR filter, 8 IR LEDs (Peak wave length: 850 nm).
Dimensions: 70 mm x 70 mm x 120 mm
Cloud storage of recorded video (optional), motion detection, night vision (10-
15 m), Arm/Disarm mode, alarms and push-notifications, antiskid coating
PEIFC01 Indoor Fixed Camera, USB-MicroUSB Cable (1.2m), USB Charger,
3M Mounting Tape, Quick Start Guide, Warranty Card, Sticker
2 years (Service Life: 2 years)
2
relevant Installation and Operation Manuals available for downloading at
Version: 3.0.0
1