ADA INSTRUMENTS CUBE 3D Manual Del Usuario página 3

THE MANUFACTURE RESERVES THE RIGHT TO MAKE CHANGES (NOT
HAVING AN IMPACT ON THE SPECIFICATIONS) TO THE DESIGN,
COMPLETE SET WITHOUT GIVING PRIOR WARNING.
APPLICATION
Line laser ADA Cube 3D is designed to check the horizontal and vertical
position of the surfaces of the elements of building structures and also
to transfer the angle of inclination of the structural part to similar parts
during construction and installation works.
SPECIFICATIONS
Leveling Range .....................................self-leveling, ±3°
Accuracy ............................................... ±1/12 in at 30 ft (±2mm/10m)
Working range ................................... 65/164 ft (20/50 (with receiver) m*))
Power Supply ...................................... 3xAАA Batteries Alkaline
Operation time .................................. Approx. 15 hours, if everything is on
Laser Source, laser class ................... 2x635nm, 2
Tripod thread ......................................1/4 "
Operating temperature.......................14º F to 113º F (-10°C +45°C)
Dimensions ........................................... 2,6x2,6x2,6 in (65х65х65 mm)
Weight .....................................................0,53 lb (240 g)
1
LASER LINES
2
FEATURES
1. Laser emitting window
2. Battery cover
3. Compensator switch
4. Tripod mount 1/4''
5. Vertical laser window
6. laser lines on/off and receiver mode
(depends on illumination of work area)
3
English