Application; Specifications; Change Of Batteries; Laser Lines - X-Line Helper 2D Manual Del Usuario

Application

Line laser X-Line HELPER 2D is designed to check the
horizontal and vertical position of the surfaces of the ele-
ments of building structures and also to transfer the angle
of inclination of the structural part to similar parts during
construction and installation works.

Specifications

Leveling Range self-leveling, ±3°
Accuracy ±1 mm/5 m
Working range
w/without receiver 70 m /
40 m* (depends on illumination of work area)
Power Supply 3xAА Batteries Alkaline
Operation time Approx. 15 hours, if everything is on
Laser Source, laser class 2x635nm, 2
Fan angle ≥120°
Tripod
Assembled size 0.35 m
Maximum height 1.05 m
Tripod thread 1/4 "
Operating temperature -10°C +45°C
Weight 250 g

Change of batteries

Open battery compartment. Insert batteries. Take care to
correct polarity. Close battery compartment.
ATTENTION: If you are not going to use instrument for a long
time, take out batteries.
1

Laser lines

2

Features

1. Compensator switch
2. Horizontal laser emitting window
3. Vertical laser emitting window

4. Keypad

5. Battery cover
6. Tripod mount 1/4"
3
Keypad
1. key to switch lasers (V/H)
2. receiver mode
3. TILT LED
Helper 2D
3