Manual Mode - Finder BLISS2 Manual Del Usuario

MANUAL MODE

With the display off, press
the point to turn the
display on.
The arc will turn red if it is
set on heating or blue if it
To change the target
temperature, press + or –
on the main screen.
is on cooling.
With the target temperature
showing, confirm by pressing
the point.
With the display off, press
the point to turn the
display on.
To set the number of hours for which the manual
mode is to apply (after which it will return to the
AUTO (weekly) mode).
Press the + to increase the hours h01 = 1 hour, h02
= 2 hours, ... Pressing the - until «h∞» is displayed
will set the permanent manual mode (until this is
canceled via the App or thermostat.)
Confirm by pressing the center point.
The small top segment of the arc will
show either red or blue, indicating
respectively that the heating or cooling
system is active.
Press X to cancel Manual operation
and to return to AUTO operation.
4