Outdoor Essentials 357272 Manual De Instrucciones

4 – Legs
1 – Bottom
1
Attach long sides to legs as shown.
Bottom
support
3
Place bottom on supports.
THE DIAGRAMS AND INSTRUCTIONS IN THIS BROCHURE ARE FOR ILLUSTRATION PURPOSES ONLY AND ARE NOT MEANT TO REPLACE A LICENSED PROFESSIONAL. ANY CONSTRUCTION
OR USE OF THE PRODUCT MUST BE IN ACCORDANCE WITH ALL LOCAL ZONING AND/OR BUILDING CODES. THE CONSUMER ASSUMES ALL RISKS AND LIABILITY ASSOCIATED WITH
THE CONSTRUCTION OR USE OF THIS PRODUCT. THE CONSUMER OR CONTRACTOR SHOULD TAKE ALL NECESSARY STEPS TO ENSURE THE SAFETY OF EVERYONE INVOLVED IN THE
PROJECT, INCLUDING, BUT NOT LIMITED TO, WEARING THE APPROPRIATE SAFETY EQUIPMENT. EXCEPT AS CONTAINED IN THE WRITTEN LIMITED WARRANTY, THE WARRANTOR DOES
NOT PROVIDE ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AND SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING CONSEQUENTIAL DAMAGES.
©2019 Universal Forest Products, Inc. Outdoor Essentials is a registered trademark of Universal Forest Products.
All rights reserved. 2801 East Beltline NE, Grand Rapids, MI 49525 1-800-598-WOOD
28 in.
ASSEMBLY INSTRUCTIONS
ACTUAL SIZE: 27-1/2 in. L x 19-3/4 in. W x 27-1/2 in. H
Kit Contents
2 – Long sides with
2 – Long sides with
no support
bottom support
OutdoorEssentialProducts.com
20 in. CEDAR ELEVATED GARDEN PLANTER
x
2 – Short sides
2 – Short sides
with notches
no notches
2
Attach short sides to assembled long sides as shown.
4
Place the plastic liner inside
the planter.
Tools needed
32 – Screws
Cordless drill with
Phillips bit
View our assembly
video at oe.media/
1 – Plastic liner
planters
You will need 2-1/2
cubic feet of soil to
fill the planter.
10412_1/19
fig. 2