Indel Webasto Marine isotherm White Instrucciones Para La Instalación Y El Uso página 26

Defect
Ice inside the maker but not in
the collection drawer.
The machine produces ice
continuously or there is no ice
production.
26
Possible cause
No or little gas in the system
The ice making cycle is not
working properly.
The compressor is running con-
tinuously.
The cable in the figure is the
STOP control of the compressor.
It may not be inserted correctly.
-Check/Insert the cable into the
correct housing.
Resistance not working
Production locking arm:
The production locking arm is
blocked/absent/incorrectly posi-
tioned. Pull it out and reposition
it correctly by moving it up/
down until you feel a "click".
User Manual
Intervention
-Search for gas leakage and/or
reload the system.
-Low thermostat, set the ther-
mostat to maximum.
Contact Technical Assistance.
Check resistance values:
replace the Ice Maker module if
necessary.
If the problem persists, replace
the mechanism.