Facom DM.UES Manual Original página 3

EN
Capacities:
Maximum load: 400 KG.
WARNINGS
Use the engine support DM.UES only to maintain the power unit of an automobile vehicle in
normal position when removing a single engine or gearbox support.
Before use, always check the recommendations of the vehicle manufacturer.
Check that the engine support DM.UES can be used safely.
Always use the engine support DM.UES with the vehicle at.
Only skilled professionals may use engine supports such as the DM.UES.
Do not modify the engine support DM.UES.
Lack of compliance with the car manufacturer instructions or the instruction manual of the
DM.UES may cause severe accidents or major damage to vehicles.
USE
NU-DM.UES_0415.indd 3
Position the two central hooks on either side of the engine
cradle. In certain cases, one hook only can be positioned.
Then position the arms under the body in strong zones.
Position the pad under the engine case.
Pressurize the system with the adjustment
screws.
Check that the assembly is stable. Otherwise do not
use the engine support DM.UES.
4/9/2015 4:03:05 PM