Eono PL02 Manual De Instrucciones página 4

STEP 1: (Continued)
OPTION B: Grommet Base Installation
before installing the desk mount.
Loosen the screw, separate the C-clamp (C) into two parts.
DESK
ø
0.39"~3.1"
DESK
Install the Grommet Base Plate (F) to the Pole using 1pc Bolt (G). Position pole (D) on the
mounting surface and secure using the support plate (H) and the bolt separated from clamp (C).
Secure the pole to the desktop by tightening the plastic knob or by using 6mm Allen key (M).
D
F
H
C
G
03
OR
M