Service Parts - Hunter Fan Care Free 33200A Manual De Usuario

the tank to completely dry. Continue to
clean the other parts of your humidifi er.
9. Remove the water diffuser cap by
squeezing the two tabs as shown in Figure
8. Rinse the cap in clean water to remove
any debris. If the cap contains hard water
residue, soak it in a mixture of one (1) quart
of water and two (2) ounces of vinegar for
20 minutes. Rinse well and reinstall the
water diffuser cap. Do not expose mo-
tor or other electrical components to
water.
To obtain a service part for your humidifi er, call customer service at 1-888-830-1326 or e-mail
us at Techsupport@hunterfanhq.com. Please be prepared to tell the operator the model number
of your humidifi er and the name of the part you need to replace and the part number. Refer
to Figure 1 for part names.
Model
Filter Frame
No.
33200A
33250A
33251 95449-01-000 95402-01-325
33252
33282
34351
95451-01-000 95401-01-325
34352
37200 95449-01-000
37250 95449-01-001 95402-01-325
37251 95449-01-000
37350 95451-01-000 95401-01-325
41711-01 11/28/2005
41711_Rev 11-28-05.indd 9
Water
Diffuser Cap
Figure 8

Service Parts

Base Water Tank Knob A
65114-01-325
95160-01-326
65114-01-325
95182-01-326
95160-01-326 65114-01-325
95182-01-326 65114-01-325
10. Wipe the surfaces of the main housing with
a soft cloth.
11. Once all the parts are clean, reassemble the
humidifi er, and follow the USING YOUR
HUMIDIFIER instructions to continue use.
If you are storing the humidifi er, make
sure the parts are completely dry, reas-
semble, and store in a dry location.
Tab
Tab
Knob B Tank Cap
65115-01-325 86113-01-325
9
Water
Filter
Diffuser Cap
74080
74884-01-000
74082
74080
74082
©2005 HUNTER FAN CO.
11/28/05, 3:26:44 PM