Parts Of The Stick Reader - Tru-Test XRS Guia De Inicio Rapido

Parts of the stick reader

LEDs
The stick reader has two LEDs. One is green and the other is blue or red,
depending on the current function of the stick reader. Here are the most common
LED display sequences:
Blue/Red LED The stick reader is in the process of scanning for or
flashing. reading an EID tag.
Green LED flashes. The EID tag has been read successfully.
Blue/Red LED is blue The stick reader is connected to a
when not flashing red. device.
Parts of the stick reader LCD
Battery indicator Shows the battery charge level.
BLUETOOTH® set Indicates that the
to AUTO
automatically connect to a
change this, see
Bluetooth
wireless The stick reader is connected to another
connection active enabled device.
Time The current time is displayed. The time and date are
recorded against the animal ID during the scanning
session. The stick reader's date and time can be set in
Data Link. See the
information.
Count The number of animals scanned during the current
scanning session.
Status Message display area.
Bluetooth
enabled
Bluetooth
setting is set to
Bluetooth
enabled device. To
Modifying the stick reader settings
Bluetooth
XRS Stick ReaderUser Manual
for
Turn on the stick reader
Press the Read button.
The stick reader beeps
Scanning an EID tag
Press and release the Read button while passing the antenna near a tag.
The ID tag number appears on the LCD, the green LED flashes once, the hand
grip vibrates and the stick reader beeps
successfully.
Tip:
If animals are moving quickly through a race or into a pen, you can hold
down the Read button continuously. Scanning will stop when the Read button is
released .
2
.
Turning off the stick reader
Press and hold the Scroll button.
A countdown appears on the LCD (3, 2, 1) then the stick reader beeps
turns off.
When Read Mode is set to ‚Standard‛ (default).
2
and the message ‚READY‛ appears on the LCD:
to indicate that the tag has been read
and