Technical Support - Approx appPOS80AM Guia Del Usuario

• Once the installation is complete, go to Control Panel,
Hardware and Sound, printers and devices. Click with the right
mouse button on the printer icon created POS-80C, select
Printer Properties, go to the Ports tab and manually select the
appropriate USB port. Finally click the OK button.
Printing via port directly
For direct printing requires printer control commands. Command
ESC / POS are integrated internally.
Note:
If your computer is connected to serial port, after installing
the driver you need to change the COM port in the printer
properties and set the COM port to printer to obtain the same bits
per second as the default printer comes to 19200.
Recycled
AEE REI-RAEE 5548 In this manual, the container (bin) symbol
indicates that the product is subject to the European directive
2002/96 / EC, electrical and electronic products, batteries, and
batteries and other accessories must necessarily be subject to a
selective collection.
At the end of the life of the device, make use of the recycling bins.
This gesture will help reduce the health risks and preserve the
environment.
Municipalities and distributors, will provide essential details on
recycling your old device.

Technical support

For more information on installing and configuring this
product please contact our support section on our website
www.approx.es section or write an email to the following
address: soporte@approxtpv.es.