Rich Context RTS889W Instrucciones De Montaje página 2

FIGURE 2
A
3
4
Step 2:
Place the decorative plastic cover (#3) on the chair's
base assembly (#4) as above picture A shows.
See Figure 2.
FULL ASSEMBLY
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your swivel rocker chair.
• In order to prolong the life and beauty of your swivel rocker chair, we recommend that it be stored in a dry and
protected area during off season periods.
V-3
3
A
3
DO NOT RETURN TO THE STORE!
STOP
PAGE 2 OF 3
FIGURE 3
4
Step 3:
Insert the seat post (#2) into the hole located in the
center of the base assembly (#4). Fasten them together
by using bolt (#6) and washer (#8). Make sure that all
of the bolts have been tightened completely.
See Figure 3.
Note:
For ease with installation, we recommend that the seat
post (#2) be slightly olied or waxed before fastening it
to the base assembly (#4).
Step 4:
See Full Assembly.
Caution:
To ensure one's safety during use of this swivel rocker
chair, examine all of the bolts to make sure that they
are securely fastened. This is a chair with swivel rocker
ability; therefore, use by young children should be adult
supervised.
2
4
8
6
35
#6 BOLT M6*35