Frequently Asked Questions - Marmitek Audio Anywhere 685 Modo De Empleo

FREQUENTLY ASKED QUESTIONS

I cannot pair my Audio Anywhere 685.
Please note the following:
1. Ensure that the AC adapter is connected and the LED is lit.
2. Make sure that the distance between the transmitter and
receiver does not exceed 10 metres and there are no major
obstacles between them.
3. Verify that the LED on the receiver is blue. If it is red, there is
no connection. If it is off, turn the on/off switch to ON.
There is no sound coming from my audio system
x
Make sure that the coaxial or TOSLINK cable is connected
properly, the correct input is selected on your audio system
and the volume of your audio system is set to the desired
level.
Should I use the same cable to the transmitter and the
receiver?
x
No. You may, for example, use the coaxial connector on the
transmitter, and the TOSLINK connector on the receiver.
I have paired my TV's audio wirelessly with my audio system,
but the sound is not in sync with the video.
Your TV needs more time to build up the image than to play the
sound. The sound coming from your TV will therefore be played
with a slight delay, to allow video and audio to be in sync.
For best results, connect the Audio Anywhere transmitter to your
TV's audio output, instead of your set-top box or satellite
receiver's audio output.
Can I connect my speakers to the receiver directly?
In order to hear sound or music, connect the receiver to an
amplifier with separate (built-in) speakers or so-called active
speakers (with built-in amplifier). You cannot connect passive
speakers directly to the receiver.
8 © MARMITEK