Care And Cleaning - Qlima FSM 40 Instrucciones De Uso

Ocultar thumbs Ver también para FSM 40:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Remove the cable tie and unravel the cordset before operation.
The fan and motor assembly are attached to a 2-position ratchet. Tilt up or
down until the assembly clicks into the desired position (Fig.6).
(Fig.6)

CARE AND CLEANING

Always disconnect electrical appliances before cleaning them.
Never spray with liquids or submerge the mist fan in water or any other
liquid.
Do not fill with water over 40
deformation.
Pour out water from sink & tank when temperature below 0
away from freezing to avoid component damaged.
Do not fill water into handles directly.
Water Sink Cleaning: If sink with dusty or dirty material,put detergent onto
soft cloth to clean the dirty place, then clean with water.
First cut power off, take out water tank then pull mist tube appropriately.
Clean it if it's dirty. Use clean water to wash mist control box.
(Fig.7)
Clutch
O
C in tank and sink to avoid discoloration or
O
C to keep water
4
47

Publicidad

Tabla de contenido
loading

Tabla de contenido