Scosche BOOMBOTTLE MM Manual Del Usuario página 8

MAGICPLATE'" INSTALLATION
OPTION3
Attach adhesive side of
metal plate to interior
of case, between device
and inside of case.
Plate will adhere to
magnetic mount
through rear panel of case.
NOTE: If choosing not to attach the metal
plate to the device or case, please leave
the adhesive backing in place. Position
the plate between the device and interior
of case with the metal surface facing the case.
MAGICPLATE™ REMOVAL
Use a thin plastic card to
surface from the mounting surface. Slowly lift up and remove
the plate. Do not use any heat or liquids to remove the
plate, due to risk of damaging your phone or dash. Contact
Scosche Customer Service for any additional assistance at
800.363.4490 Ext. 1 or customerservice@scosche.com.
OPTION2
Attach adhesive side of metal
plate directly to back of case.
carefully
lift the plates adhesive
8