Tripp-Lite U444-06N-H4GUC2 Manual Del Propietário página 4

Installation
Note: When the hub is connected to the USB-C port on your
computer and to a network via Cat5e/6 cabling, a network
connection will be automatically established. If no connection
is made, you can manually establish one by going to your
computer's network settings page. For example, on a Mac™,
you would navigate to the Network section found in System
Preferences, click "Assist Me" to get to the Network Setup
Assistant, then follow the prompts to establish a connection.
1. Connect the built-in USB-C cable to the USB-C
Thunderbolt™ 3 port on your laptop, tablet or other
compatible device.
2. Connect the HDMI port to your display with a
user-supplied HDMI cable.
3. Connect a USB peripheral, such as a thumb drive
or MP3 player, to the USB-A port.
4. Connect the RJ45 port to a Gigabit Ethernet
network with a user-supplied UTP cable.
5. Connect a USB-C device to the Power Delivery
port with a user-supplied USB-C cable. You can
also charge the host device by connecting its wall
charger to this port.
4