Main Unit - Samsung HW-K360 Manual Del Usuario

CONNECTING THE SUBWOOFER TO THE MAIN UNIT
You can enjoy rich bass tones and better sound quality by linking the subwoofer to the main unit.
The main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer
are turned on. When auto-connection is complete, the blue indicator on the rear of the subwoofer stops blinking
and glows blue continuously. The subwoofer's LED indicator modes are listed below:
blue
1
Auto-connection is complete.
blue
2
Auto-connection is not complete.
blinking
a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet.
blue
3
is not lit
b. If the power cord is plugged in correctly, check the main unit. If your main unit is off (in
standby mode), the subwoofer will also be in standby mode and the blue LED won't be
lit.
c If the indicator on the rear of the subwoofer does not glow continuously in blue, the subwoofer has not
connected. If this occurs, follow the directions below to connect the subwoofer manually.
c Important: Before you begin, put the battery into the remote. See page 12 for instructions.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.
c The LINK indicator (Blue LED) on the subwoofer blinks quickly.
3. Press the
button on your remote control for 5 seconds while the main unit is turned OFF.
4. The ID SET message appears on the display of the main unit for a short period of time, and then disappears.

Main Unit

Subwoofer
ID SET
· 4 · English