48-Port Gigabit Ethernet Web-Managed Switch with 4 SFP Ports
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the Power LED lights.
LED
Power
1–48
(RJ45)
49–52
(SFP)
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address field.
The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username field, enter admin; in the
Password field, enter the serial number on the bottom of the switch. Click OK.
Color
Red
10/100 Mbps: Orange;
1000 Mbps: Green
Green
Status
On
Unit is receiving power.
Off
Check connection.
On
Valid port connection.
Blinking
Data transmitted/received.
Off
No link established.
On
Valid port connection.
Blinking
Data transmitted/received.
Off
No link established.
Instructions
Operation
English
3