Utilitech UT175TP Manual De Instrucciones página 8

ASSEMBLY INSTRUCTIONS
4. Use wall plate (A) to mark four mounting hole
locations.
Note: Use bubble level (B) to level wall plate (A).
5. Drill four 7/32 in. pilot holes 2-1/3 in. (60 mm)
deep at the marked locations for the mounting
holes.
6. Mount wall plate (A) using four steel
washers (NN) and four 8 mm lag bolts (II) with a
1/2 in. socket wrench (not included).
Hardware Used
8 mm
II
Lag bolt
NN
Steel washer
4
5
6
x 4
x 4
8
A
A
II
B
NN